Panasonic 5000 Series Operating Instructions Manual Download Page 244

Page: 244 / 309

Miscellaneous Flags

MANAGER PROGRAMS

Note: Replace the a - h positions with the value of the selection you need. Your selections

must be entered in the appropriate (a - h) position. Enter '0' for any positions you do

not want to use. If you need more than one option within a set, add the values.

1 = Tax 1 is affected by the Universal key.

2 = Tax 2 is affected.

4 = Tax 3 is affected.

1 = This Universal key updates Net Sales.

2 = MGR lock is required for this Universal key.

4 = Set a preset 100% rate.

1 = The percentage is applied item-by-item.

2 = The percentage is applied to a subtotal or discount subtotal.

4 = Allow the percentage to net Major Groups, Subgroups, and PLUs (valid

only for item discounts, not for subtotal discounts)

1 = The Universal key uses an open, manual percentage.

2 = The Universal key is a subtracting percentage, or discount. (If not set,

the Universal key acts as an additive percentage or surcharge.)

4 = The cashier can override the preset percentage.

e-h)

Preset % - enter the 4-digit rate (ex. 0700 =7%)

Open % - enter 0000.

Examples:

70121500 = item-by-item 15% Discount affecting all taxes.

12222500 = Subtotal 25% Disc with MGR compulsion; Tax 1 affected.

02201500 = 15% Surcharge with MGR compulsion, no taxes affected.

Repeat Steps 3 and 4 for each universal percentage key you want to change.

Press CASH twice to advance to the MGR Mode menu.

CASH

Gift Certificate Sales Program

The 5000 System can include as many as three keys to record gift certificate sales. If your

keyboard has gift certificate keys, you can use the following procedure to change the

current assignment, amount, tax status, etc.) of each key.

Turn your keylock to MGR Mode.

Panasonic 5000 Version 4.0 Operating Instructions - Rev. 2.0

5-25

Summary of Contents for 5000 Series






















































































































































































































































































































Search results

Summary of Contents for 5000 Series

Reviews:

Related manuals for 5000 Series

Brands by name

Popular brands

Panasonic 5000 Series, Operating Instructions Manual

Search results

Summary of Contents for 5000 Series

Reviews:

Related manuals for 5000 Series

Brands by name

Popular brands