manualshive.com logo in svg

Panasonic 5000 Series, Operating Instructions Manual, Page: 52 / 309

Share
Download
Panasonic 5000 Series Operating Instructions Manual Download Page 52

Condiments

OPERATO

R PROCEDURES

Condiments

Condiments are similar to preparation instructions. You can enter them to send a special

description to the kitchen. Most often, condiments are optional entries and you enter them

only when requested. But, some items may be programmed to require a condiment entry.

Your system may also use class codes to help "match" items to condiments. These class

codes help prevent you from entering an invalid condiment, such as mustard with ice

cream. If the condiment does not match the item, a "Mismatch" message displays and

your entry is not allowed.

Optional Condiments

If the item ordered does not require a condiment, use this procedure to enter the

selection. 

1.

Press the item ordered. 

2.

Press the requested condiment(s).

        

        

        

CHEZ

BURG

MUST

ONION

Required Condiments 

Some items always require a condiment or side dish entry. These items prompt you to

make a selection. You may get a one-line message if you forget to enter a condiment. Or

your screen may instead display a list of valid condiments whenever you press the item.

1.

Enter the item. If a list of condiment selections (as shown in the example on the

next page) displays, go to Step 2. If your screen does not display a list of

condiments, go to Step 3.

HOUSE

SALAD

If it has been enabled in your program, your screen displays a list of condiments

associated with your selection.

Panasonic 5000 Version 4.0 Operating Instructions - Rev. 2.0

2-21

Summary of Contents for 5000 Series






















































































































































































































































































































Reviews:

No comments