manualshive.com logo in svg

Panasonic 5000 Series, Operating Instructions Manual, Page: 76 / 309

Share
Download
Panasonic 5000 Series Operating Instructions Manual Download Page 76

Payment

OPERATOR PROCEDURES

2.

Press CHECK.

[ amount tendered ]

 

CHECK

Note: If an account number is required, enter the number and press ACCT #. Then enter

the check amount and press CHECK.

Charge Payment

If your system has a Magnetic Card Reader, you can use it for credit card transactions.

Your keyboard may also have keys for each credit card or it may have a single Coded

Charge key. Even if you normally use the Magnetic Card Reader for credit cards, you may

need to use one of the charge keys if the Reader cannot interpret a worn card.

The procedures for credit card transactions are described on the next pages. Refer to the

procedure used in your system.

Magnetic Card Reader

The Magnetic Card Reader allows you to "scan" a credit card payment. When you run a

credit card through the Card Reader, the system reads the account number and

expiration date. It also determines the type of credit card (Visa, MasterCard, American

Express, etc.). If the credit card is very worn, and does not scan, use the manual

procedure for Individual or Coded Credit Cards, described on the next pages of this

section.

Exact Tender:

If the customer wants to charge the entire transaction to the credit

card, run or "swipe" the credit card through the Magnetic Card

Reader.

[ swipe credit card ]

Note: If the credit card has expired, a "Card Expired" message displays. Press CLEAR and

visually check the expiration date. At this point, you can press ALL VOID or

CANCEL to escape from the transaction, or you can tender the transaction with

another type of payment.

Partial Tender:

If the customer pays part of the transaction with a credit card and

part with cash, you can use this Partial Payment procedure.

1.

Enter the amount being paid with a credit card. 

2.

Run the credit card through the Magnetic Card Reader. The amount still due

Panasonic 5000 Version 4.0 Operating Instructions - Rev. 2.0

2-45

Summary of Contents for 5000 Series






















































































































































































































































































































Reviews:

No comments