Nortel Passport 8600 Series, Installation Manual, Page: 34 / 164

34 Ethernet Routing Switch 8600 module fundamentals
Figure 5
8608GTE and 8608GTM module LEDs
The following table describes the 8608GTE and 8608GTM module LEDs.
Table 2
8608GTE and 8608GTM module LEDs
Type Label Color, State Meaning
Green, Steady The port is linked and enabled.
Amber, Steady The port is connected, but detects an error
condition.
Link
Off The port is disabled or has no link.
Port
Activity Green, Blinking
The port is receiving data. As port utilization
increases this LED can blink so fast that it
appears to be steady.
Green, Steady The module completed the power-on self-test
and software initialization and is operating
normally.
Amber, Steady The module failed the power-on self-test.
Amber, Blinking The module is inserted into the chassis and is
running diagnostics.
Module Online
Off The module power is off. If the switch power
is on, the module is performing the power-on
self-test and software initialization. A module in
this state is not yet functional.
The 8608GTE module supports up to 32 000 table entries in its forwarding
engine.
The 8608GTM module is an M module and supports up to 128 000 table
entries in its forwarding engine, which supports large layer 2 and layer 3
configurations, including Internet routing tables.
The 8608GTE module does not support R or M mode. The 8608GTM
module supports R and M mode.
Nortel Ethernet Routing Switch 8600
Installation — Modules
NN46205-304 02.02 Standard
16 June 2008
Copyright © 2008 Nortel Networks
.