Nord Drivesystems SK 200E Series, Manual

Page: 60 / 265

NORDAC SK 200E Manual
60 Subject to technical alterations BU 0200 GB
Mains Unit modules
Mains Unit Module Description Data
External 24V mains unit
1~ 230V **
SK TU4-24V-123-B
Part No. 275281108 (IP55)
Part No. 275281158 (IP66)
External 24V mains unit to supply the SK 200E, using
a mains voltage of 230V
External 24V mains unit
1~ 400V **
SK TU4-24V-140-B
Part No. 275281109 (IP55)
Part No. 275281159 (IP66)
External 24V mains unit to supply the SK 200E, using
a mains voltage of 400V
24V, ±10%, 420mA
10V ref., ±0.2V, 5mA
Analog input 0-10V
500
Ω
burden resistor for
evaluation of 0/4-20mA
Supply: 230 or 400V
External 24V 1~ 230V,
potentiometer / switch **
SK TU4-POT-123-B
Part No. 275281110 (IP55)
Part No. 275281160 (IP66)
The Potentiometer Box is used for the direct control of
the frequency inverter, without the use of external
components.
The 24V mains unit supplies the SK 200E, using a
mains voltage of 230V.
External 24V 1~ 400V,
potentiometer / switch **
SK TU4-POT-140-B
Part No. 275281111 (IP55)
Part No. 275281161 (IP66)
The Potentiometer Box is used for the direct control of
the frequency inverter, without the use of external
components.
The 24V mains unit supplies the SK 200E, using a
mains voltage of 400V.
24V, ±10%, 420mA
ON R / OFF, ON L
0…100% Setpoint
Supply: 230 or 400V
Connection Unit TU4
SK TI4-TU-NET
Part No. 275280100 (IP55)
Part No. 275280600 (IP66)
The Connection Unit is always required in order to use
an external Technology Unit. It implements the
mechanical and electrical connection of the TU4 to the
SK 200E or the wall mounting kit.
18x 2.5mm
2
AWG 26-14
Spring-loaded terminals
TU4 Wall-mounting kit
SK TIE4-WMK-TU
Part No. 275274002
Using the wall mounting kit, a Technology Unit can be
used/installed separately from the SK 200E.
**) In order to use the TU4 modules, a suitable
SK T14-TU-NET Connection Unit must always be available.