Nord Drivesystems SK 200E Series, Manual

Page: 203 / 265

6 Parameterisation
BU 0200 GB Subject to technical alterations 203
Setting after commissioning
Parameter
No. [Array]
Name
Factory
setting
Super
visor
P 1 P 2 P 3 P 4
MOTOR DATA / CHARACTERISTIC CURVE PARAMETERS (Section 6.1.3)
P200 (P) Motor list 0
P201 (P) Nominal frequency [Hz] 50.0 * S
P202 (P) Nominal speed [rpm] 1385 * S
P203 (P) Nominal current [A] 4.8 * S
P204 (P) Nominal voltage [V] 230 * S
P205 (P) Nominal power [kW] 1.10 *
P206 (P) cos phi 0.78 * S
P207 (P)
Star Delta con.
[star=0/delta=1]
1 * S
P208 (P)
Stator resistance [
Ω
]
6.28* S
P209 (P) No-load current [A] 3.0 * S
P210 (P) Static boost [%] 100 S
P211 (P) Dynamic boost [%] 100 S
P212 (P) Slip compensation [%] 100 S
P213 (P) ISD control loop gain [%] 100 S
P214 (P) Torque precontrol [%] 0 S
P215 (P) Boost precontrol [%] 0 S
P216 (P) Time boost precontrol [s] 0.0 S
P217 (P) Oscillation damping [%] 10 S
P218 Modulation depth [%] 100 S
P219 Auto. magn. adjustment [%] 100 S
P220 (P) Parameter identification 0
*) dependent on FI power or P200/P220
CONTROL PARAMETERS (Section 6.1.4)
P300 (P) Servo Mode [On / Off]
0
(Off)
S
P301 Incremental encoder 6 S
P310 (P) Speed controller P [%] 100 S
P311 (P) Speed controller I [%/ms] 20 S
P312 (P) Torque current controller P [%] 200 S
P313 (P)
Torque current controller I
[%/ms]
125 S
P314 (P)
Torque current controller limit
[V]
400 S
P315 (P) Field current controller P [%] 200 S
P316 (P) Field current controller I [%/ms] 125 S
P317 (P) Field current controller limit [V] 400 S
P318 (P)
Field weakening controller P
[%]
150 S