Nord Drivesystems SK 200E Series, Manual, Page: 195 / 265

6 Parameterisation
BU 0200 GB Subject to technical alterations 195
Parameter Setting value / Description / Note Device Supervisor
Parameter
set
P741
[-01]
...
[-10]
Process data Bus Out
S
This parameter provides information about the actual status word and the actual values that are
transferred via the bus systems.
For standardisation of actual values: See also (Section 9.10).
[-01] = Status word Status word
[-02] = Actual value 1 (P543 [-01])
[-03] = Actual value 2 (P543 [-02])
[-04] = Actual value 3 (P543 [-03])
[-05] = resulting status of Out Bit P481 The displayed value depicts all Bus Out
Bit sources linked with
OR .
0000 ... FFFF
(hex)
[-06] = Parameter data Out 1
[-07] = Parameter data Out 2
[-08] = Parameter data Out 3
[-09] = Parameter data Out 4
[-10] = Parameter data Out 5
Data during parameter transfer.
P742 Database version
S
0 ... 9999 Displays the internal database version of the FI.
P743 Inverter ID
0.25 ... 11.00
Displays the inverter power in kW, e.g. "1.50"
⇒
FI with 1.5 kW nominal power.
P744 Configuration
This parameter displays the special devices integrated in the FI. Display is in hexadecimal code
(SimpleBox, Bus system).
The display is in plain text when the ParameterBox is used.
High byte: Low byte:
0000 ... FFFF
(hex)
00
hex
01
hex
02
hex
03
hex
No extension
Encoder
Posicon
---
00
hex
01
hex
02
hex
03
hex
Standard I/O (SK 205E)
STO (SK 215E)
AS-I (SK 225E)
STO and AS-I (SK 235E)
P747 Inverter voltage range
Indicates the mains voltage range for which this device is specified. 0 ... 2
0 = 100..0.120V 1 = 200..0.240V 2 = 380...480V