Nord Drivesystems SK 200E Series, Manual, Page: 82 / 265

NORDAC SK 200E Manual
82 Subject to technical alterations BU 0200 GB
3.5 Details of external Technology Units SK TU4-…
The Technology Units are divided into two different groups. The BUS group includes all the Bus modules
and the I/O extension. These are connected to the SK 200E via the system bus.
The NET group includes the Mains Unit and PotentiometerBox modules. These are each equipped with a
24V mains unit for the supply of the SK 200E and provide the facility processing analog signals.
Because of the very wide variety of functions, these two groups of devices require different adapter units.
3.5.1
Adapter Unit SK TI4-TU-BUS /-NET
Bus modules = SK TI4-TU-BUS
Mains unit modules = SK TI4-TU-NET
SK TI4 ‐ TU ‐ BUS SK TI4 ‐ TU ‐ NET
Feature Bus modules Mains Unit modules
Designation of Adapter Unit SK TI4-TU-BUS SK TI4-TU-NET
Designation of Technology Units SK-TU4-PBR-…
SK-TU4-CAO-…
SK-TU4-DEV-…
SK-TU4-IOE-…
SK-TU4-POT-…
SK-TU4-24V-…
24V supply required Yes No
24V supply integrated No Yes
System bus connection Yes No
Motor mounting possible Yes Yes
Mounting near to motor possible Yes,
with wall-mounting kit
SK TIE4-WMK-TU
Yes,
with wall-mounting kit
SK TIE4-WMK-TU
All connections are made via the Adapter Unit. This also includes the
customer’s control of the module and the connection of the module to the
SK 200E. Parallel to this, the digital inputs and outputs of the SK 200E are also
available.
The relevant Technology Unit is attached to the appropriate Adapter Unit with
screws.
Installation information can be found in Section 3.2.2.