Motor Power Company DUET_FL 48/10, User Manual

Page: 74 / 196

Page 74
-18
Figure 17: Homing to the positive stop
Do not use homing methods 16 and 17 unless the mechanical system of the positioning
axis is configured accordingly. Set the running speed as low as possible in order to limit
the kinetic energy when the drive hits the stop.
Method 35: Homing to the current position (no movement)
In the case of method 35, the zero position refers to the current position when the homing run is
started.
Parameterizing the homing run
The homing run can be parameterized in the Homing position menu. You can open this menu under
Parameters/Positioning/Homing position or by clicking the REF button in the tool bar.
The following window will appear:
The Positioning settings button will lead you to the menu for parameterizing the general positioning
settings (e.g. positioning limits). See chapter Global positioning settings .
Click GO! if you want to start a homing run.
Tab: Settings
User Manual DUET_FL „DUET_FL 48/10“ Version 1.1 Motor Power Company