Motor Power Company DUET_FL 48/10, User Manual

Page: 45 / 196

Page 45
The user can select display units for the following physical quantities:
 Position / Revolutions
 Speeds
 Accelerations
 Torques (in Nm or A)
The display units are configured regardless of any setpoint assignment via field bus.
Thus, the configuration of the display units does not affect the factor group or the notation
and dimension indices in field-bus-specific protocols such as the CANopen factor group!
Table 6: Display mode
Selection Units
Standard valuesFor linear axles:
Positions in distance units, speeds in
[distance units]/s, accelerations in
[distance units]/s
2 .
For rotary drives: Positions in
revolutions, degree or radian, different
speed and acceleration units.
User-defined
Examples:

For linear axles and non-
metric distance, speed and
acceleration units (e.g. inch,
inch/min).

For rotary drives with special
Direct input
User Manual DUET_FL „DUET_FL 48/10“ Version 1.1 Motor Power Company