Motor Power Company DUET_FL 48/10, User Manual

Page: 132 / 196

Page 132
No. Name Meaning Scaling
0080 currc_i_u_act Measured phase current of phase U Basic unit current
0081 currc_i_v_act Measured phase current of phase V Basic unit current
0082 ioh_uzk_volt DC bus voltage (intermediate circuit
voltage) Basic unit voltage
0083 ioh_mot_temp Motor temperature Basic unit temperature
0084 ioh_power_stage_temp Power stage temperature Basic unit temperature
0085 ioh_din Pin status of the digital inputs none
0086 ioh_dout_data Current status of the digital outputs
Bit field, DOUT0 ready for operation,
hard-wired
DOUT1 programmable
DOUT2 programmable
DOUT3 holding brake Hard-
wired
0087 ioh_aout_range Value range of the analog monitor
(maximum) for both channels Basic unit voltage
0088 ioh_aout_resolution_volt Resolution of the analog monitor, indication
of a voltage for one bit referred to the value
range Basic unit voltage
0089 ioh_dout2_1_func Defines which functionality will be
connected to which digital output. none
008A ioh_aout0_ko_nr Analog monitor 0: Number of the
communication object of the quantity to be
displayed Number of the communication
object of the quantity to be
displayed
008B ioh_aout0_scale Analog monitor 0: Scaling Basic unit gain
008C ioh_aout0_offset Offset voltage for the analog monitor Basic unit voltage
008D ioh_aout1_ko_nr Analog monitor 1: Number of the
communication object of the quantity to be
displayed Number of the communication
object of the quantity to be
displayed
008E ioh_aout1_scale
Analog monitor 1: Scaling
Basic unit gain
008F ioh_aout1_offset Offset voltage for the analog monitor Basic unit voltage
0090 ioh_ain0_offs Offset AIN0 Basic unit voltage
0091 ioh_ain1_offs Offset AIN1 Basic unit voltage
0092 ioh_ain0_safezero Safe zero Basic unit voltage
0093 ioh_ain1_safezero Safe zero Basic unit voltage
0094 ioh_control
Configuration of analog monitors &
temperature sensor
none
0095 ioh_pins_used Optionally, the values for DIN0…DIN3 can
be parameterized as AIN0, #AIN0, AIN1,
#AIN1 none
00A0 eeval_enc_phi Returns the rotor position without angle
encoder offset Basic unit degree
00A1 enc_config Encoder configuration word none
00A2 emu_ctrl Setting of operating modes none
00A3 eeval_enc_phi_offs Offset angle of the angle encoder one
revolution Basic unit degree
00A4 eeval_x2b_line_cnt Line count of an analog incremental
encoder Increments line count = 4 x
line count
User Manual DUET_FL „DUET_FL 48/10“ Version 1.1 Motor Power Company