Motor Power Company DUET_FL 48/10, User Manual

Page: 151 / 196

Page 151
Parameter set management
General
In order for the DUET_FL servo positioning controller to control the motor properly, the properties of
the DUET_FL servo positioning controller must be set correctly. In the following, the individual
properties are called
parameters . The total of all parameters for a servo positioning controller/motor
combination is called a parameter set .
The following illustrations shows how the parameter sets are managed:
PC
*.DCO-file
DIS-2 ServoCommander
serial communication
.
Reading from servo
and save in file
Reading from file
and save in servo
load default
parameter set
save parameter set
reset controller
Flash
Default-
parameter set
RAM
Servocontroller
Figure 28: Online parameterization
The current parameter set of the DUET_FL servo positioning controller is stored in the RAM (RAM =
Random Access Memory). The RAM looses its contents when the power supply is switched off. In
order to permanently save a parameter set, it can be copied into the controller memory using the
command
File/Parameter set/Save parameter set . The memory keeps its contents even if the power
supply is switched off.
User Manual DUET_FL „DUET_FL 48/10“ Version 1.1 Motor Power Company