Motor Power Company DUET_FL 48/10, User Manual

Page: 32 / 196

Page 32
Preparation for commissioning
System overview
The DUET_FL servo positioning controller was designed such that it can be mounted directly on the
motor. As a result it forms a compact and harmonized unit together with the motor.
Simply connect the power supply and - if applicable - the inputs and outputs or field busses used for
your application.
The DUET_FL ServoCommander TM parameterization program can be used to parameterize,
commission and analyze the DUET_FL servo positioning controller in a particularly comfortable way.
Connecting the DUET_FL to the control system
Prior to activating the power supply for the DUET_FL servo positioning controller for the first time, you
should connect or completely wire the superordinated control / inputs and outputs / field busses and
the power supply unit. Please read
chapter Connectors at the DUET_FL 48/10 in the appendix.
For the parametrization of the servo positioning controller, the serial interface of the DUET_FL has to
be connected to a free COM port on the notebook / PC.
Please check the wiring and the level of the supply voltages carefully prior to activating
the power supply for the first time!
Wiring errors are the most common reason for operating problems.
A wiring error or a too high operating voltage may also damage the device!
3.1 Installation and start of the DUET_FL
ServoCommander
TM
Proceed as follows for the installation from CD-ROM:
1. Put the CD-ROM into the CD-ROM drive of your computer.
2. Start the Windows ® Explorer.
3. Select the directory DEUTSCH or ENGLISH on the CD-ROM.
4. Double-click the SETUP.EXE program to start it.
5. Follow the instructions of the installation program.
The installation program creates a new program group called "Motor Power Company". In this program
group, you will find the entry "DUET_FL ServoCommander" through which you can start the
parametrization program.
User Manual DUET_FL „DUET_FL 48/10“ Version 1.1 Motor Power Company