Motor Power Company DUET_FL 48/10, User Manual

Page: 177 / 196

Page 177
Connection: CAN bus [X401] and [X402]
 Configuration on the device: [X401] M12 flush-type plug, 5-pin type, A-coded
[X402] M12 flush-type socket, 5-pin type, A-coded
 Position: [X401] front - centre
[X402] front - left
Mating connector [X401]: Assembled M12 bus cable, e.g. made by Phoenix, one
end male connector, one end female connector, prefabricated
lengths, order name: SAC-5P-MS/xxx-920/FS SCO, xxx defines
the length in [m]. The following lengths are available:
xxx = 0.3 / 0.5 / 1.0 / 2.0 / 5.0 / 10.0 / 15.0
[X402] [X401] [X5]
Figure 41: Position and numbered pins [X401], [X402] and [X5] at DUET_FL 48/10 FB
Table 35: Pin assignment of connector [X401] and [X402]
Pin no. Name Value Specification
1
Shield PE
Contact for cable shield, in the DUET_FL connected with the
housing
2
-- - Not used
3
CAN_GND 0 V
Reference potential for the CAN bus, internally connected
with the common reference potential for the intermediate
circuit and the logic system
4
CANHI 0 V 5 V Signal CAN_H according to CAN bus specification
5
CANLO 0 V 5 V Signal CAN_L according to CAN bus specification
User Manual DUET_FL „DUET_FL 48/10“ Version 1.1 Motor Power Company