Motor Power Company DUET_FL 48/10, User Manual

Page: 157 / 196

Page 157
When a new firmware is loaded, the parameter set stored in the servo positioning controller will be
overwritten. This is why the following message is displayed:
Here you can decide whether you want to save your parameter set on the PC. If you click the Yes
button, the menu for saving the parameter set will be opened.
The following selection menu is displayed:
1. Select the firmware to loaded and click the Open button.
2. Then a window for selecting the data transfer rate (baud rate) opens:
3.Try a baud rate of 115200 bauds. If this leads to data transfer problems (error messages), you have
to reduce the baud rate for the next trial.
A successful firmware download is indicated by the message below:
User Manual DUET_FL „DUET_FL 48/10“ Version 1.1 Motor Power Company