Motor Power Company DUET_FL 48/10, User Manual

Page: 26 / 196

Page 26
Safety notes
General safety notes
The servo drive controller corresponds to IP54 class of protection as well as pollution
level 1. Make sure that the environment corresponds to this class of protection and
pollution level.
Only use replacements parts and accessories approved by the manufacturer.
The devices must be connected to the mains supply as per EN regulations, so that they
can be cut off the mains supply by means of corresponding separation devices (e.g. main
switch, contactor, power switch).
Gold contacts or contacts with a high contact pressure should be used to switch the
control contacts.
Preventive interference rejection measures should be taken for control panels, such as
connecting contactors and relays using RC elements or diodes.
The safety rules and regulations of the country in which the device will be operated must
be complied with.
The environment conditions defined in the product documentation must be kept. Safety-
critical applications are not allowed, unless specifically approved by the manufacturer.
For notes on installation corresponding to EMC, please refer to chapter 11.20 Notes
concerning safe and EMC-compliant installation The compliance with the limits required
by national regulations is the responsibility of the manufacturer of the machine or system.
The technical data and the connection and installation conditions for the servo drive
controller are to be found in this product manual and must be met.
DANGER!
The general setup and safety regulations for work on power installations (e.g. DIN, VDE,
EN, IEC or other national and international regulations) must be complied with.
Non-compliance may result in death, personal injury or serious property damages.
User Manual DUET_FL „DUET_FL 48/10“ Version 1.1 Motor Power Company