Mitsubishi Electric FR-E800, Instruction Manual

Page: 159 / 484

158
8. (E) Environment Setting Parameters
8.1 Clock
8
(E) Environment Setting Parameters
8.1
Clock
The time can be set. The time can only be updated while the inverter power is ON.
Purpose Parameter to set
Refer to
page
To set the time Clock P.E020 to P.E022 Pr.1006 to Pr.1008 158
To set a limit for the reset function.
To shut off output if the operation panel
disconnects.
To force deceleration to stop on the operation
panel.
Reset selection/
disconnected PU
detection/PU stop
selection/reset limit
P.E100 to P.E102,
P.E107
Pr.75 161
To select the display language of the
parameter unit PU display language
selection
P.E103 Pr.145 164
To control the buzzer of the parameter unit or
LCD operation panel
PU buzzer control P.E104 Pr.990 165
To adjust the LCD contrast of the parameter
unit or LCD operation panel
PU contrast adjustment P.E105 Pr.991 166
To set the frequency automatically.
To disable the operation panel. Operation panel operation
selection
P.E200 Pr.161 167
To change the frequency change increments
which changes when using the setting dial of
the operation panel
Frequency change
increment amount setting
P.E201 Pr.295 169
To determine which direction the motor
rotates when the RUN key on the operation
panel is pressed.
RUN key rotation direction
selection
P.E202 Pr.40
170
To use the regeneration unit to increase the
motor braking torque Regenerative brake
selection
P.E300, P.G107 Pr.30, Pr.70 442
To change the overload current rating
specification
Multiple rating setting P.E301 Pr.570 171
To prevent parameter rewriting
Parameter write disable
selection
P.E400 Pr.77 173
To restrict parameters with a password Password P.E410, P.E411 Pr.296, Pr.297 175
To use parameters freely Free parameter P.E420, P.E421 Pr.888, Pr.889 178
To change parameter settings for a PM motor
by batch
PM parameter initialization P.E430 Pr.998 104
To set multiple parameters by batch
Automatic parameter
setting
P.E431 Pr.999 179
To display the required parameters
Applicable parameter
display and user group
function
P.E440 to P.E443
Pr.160, Pr.172 to
Pr.174
181
To reduce the motor noise and EMI
PWM carrier frequency
changing
P.E600 to P.E602
Pr.72, Pr.240,
Pr.260
184
To understand the maintenance time of
inverter parts and peripheral devices
Inverter parts life display
P.E700 to P.E706,
P.E708
Pr.255 to Pr.259,
Pr.506, Pr.507,
Pr.509
186
Environmental impact
diagnosis function
P.E709 Pr.198 186
Maintenance output
function
P.E710, P.E711 Pr.503, Pr.504 190
Current average monitor P.E720 to P.E722 Pr.555 to Pr.557 191