Mitsubishi Electric FR-E800, Instruction Manual

Page: 13 / 484

12
1. Introduction
1.1 Inverter model
• E: The output specification for monitoring and the rated frequency are shown for the standard model, and the
communication protocol group is shown for the Ethernet model and the safety communication model.
• F: Availability of circuit board coating / plated conductors is shown.
*1 Conforming to IEC 60721-3-3 3C2
NOTE
• In this Instruction Manual, the inverter model name consists of the applicable motor capacity and the rated current.
(Example) FR-E820-0008(0.1K)
 How to read the SERIAL number
Symbol Monitoring/protocol specification Rated frequency Control logic
-1 Pulse (terminal FM) 60 Hz Sink logic
-4 Voltage (terminal AM) 50 Hz Source logic
-5 Voltage (terminal AM) 60 Hz Sink logic
PA
Protocol group A (CC-Link IE TSN, CC-Link IE Field Network Basic, MODBUS/
TCP, EtherNet/IP, and BACnet/IP)
60 Hz Sink logic
PB
Protocol group B (CC-Link IE TSN, CC-Link IE Field Network Basic, MODBUS/
TCP, PROFINET)
50 Hz Source logic
Symbol Circuit board coating
*1
Plated conductor
None Without coating Without plated conductors
-60 With coating Without plated conductors
The SERIAL consists of two symbols, three characters indicating the production year
and month, and six characters indicating the control number.
The last two digits of the production year are indicated as the Year, and the Month is
indicated by 1 to 9, X (October), Y (November), or Z (December).
Rating plate example
Symbol Year Month Control number
SERIAL