Mitsubishi Electric FR-E800, Instruction Manual

Page: 294 / 484

11
12
13
14
15
16
17
18
19
20
293
12. (M) Item and Output Signal for Monitoring
12.6 Output terminal function selection
 Assignment of output signals
• The signals can be assigned to the open collector output terminals (2 terminals) and relay output terminal (1 terminal),
which are provided as the output terminals of the inverter. (The open collector output terminals are provided only with the
standard model.)
• The signals can be output via communication, or assigned to the extension terminals of the plug-in option (FR-A8AY or
FR-A8AR).
○ : Assignment/output available, ─ : Assignment/output unavailable (no function)
*1 The communication protocol affects which terminal can be used. For details, refer to the Instruction Manual (Communication) or the Instruction
Manual of the communication option.
*2 Refer to the Instruction Manual of the option for details on the option output terminals.
 Output signal list
• A function listed below can be set to each output terminal.
• Refer to the following table and set the parameters. (0 to 99, 200 to 299: Positive logic, 100 to 199, 300 to 399: Negative
logic)
Pr.
Terminal
name
External output terminal
(physical terminal)
Output via
communication
*1
Option output terminal (physical
terminal)
*2
FR-E800
FR-E800-
(SC)E
FR-A8AY FR-A8AR
190 RUN ○ — ○ — —
191 FU ○ — ○ — —
192 A,B,C ○ ○ ○ — —
193 NET Y1 — — ○ — —
194 NET Y2 — — ○ — —
195 NET Y3 — — ○ — —
196 NET Y4 — — ○ — —
313 DO0 — — ○ ○ —
314 DO1 — — ○ ○ —
315 DO2 — — ○ ○ —
316 DO3 — — — ○ —
317 DO4 — — — ○ —
318 DO5 — — — ○ —
319 DO6 — — — ○ —
320 RA1 — — — — ○
321 RA2 — — — — ○
322 RA3 — — — — ○
Setting
Signal
name
Function Operation
Related
parameter
Refer to page
Positive
logic
Negative
logic
0 100 RUN Inverter running
Output during operation when the inverter
output frequency reaches
Pr.13 Starting
frequency or higher.
— 296
1 101 SU
Up to frequency
*1
Output when the output frequency reaches
the set frequency.
Pr.41 301
3 103 OL Overload warning
Output while the stall prevention function
works. Pr.22, Pr.23,
Pr.66, Pr.154
256
4 104 FU
Output frequency
detection
Output when the output frequency reaches
the frequency set in
Pr.42 ( Pr.43 during
reverse rotation) or higher.
Pr.42, Pr.43 301
7 107 RBP
Regenerative brake
prealarm Output when the regenerative brake duty
reaches 85% of the setting of
Pr.70 .
Pr.70 442
8 108 THP
Electronic thermal O/L
relay pre-alarm
Output when the cumulative electronic
thermal O/L relay value reaches 85% of the
trip level. (The electronic thermal O/L relay
function (E.THT/E.THM) is activated when
the value reaches 100%.)
Pr.9 238
11 111 RY Inverter operation ready
Output when the reset process is completed
after powering ON the inverter or when the
inverter is ready to start operation with the
start signal ON or during operation.
— 296