Mitsubishi Electric FR-E800, Instruction Manual

Page: 311 / 484

310
13. (T) Multi-Function Input Terminal Parameters
13.1 Analog input selection
13
(T) Multi-Function Input Terminal Parameters
13.1
Analog input selection
The functions to switch the analog input terminal specifications and forward/reverse rotation by the input signal polarity are
selectable.
Purpose Parameter to set
Refer to
page
To inverse the rotation direction with the
voltage/current analog input selection
(terminals 2 and 4)
Analog input selection P.T000, P.T001 Pr.73, Pr.267 310
To assign functions to analog input
terminals
Terminal 4 function assignment P.T040 Pr.858 315
To eliminate noise on analog inputs Analog input filter P.T002 to P.T007
Pr.74, Pr.822, Pr.826,
Pr.832, Pr.836,
Pr.849
316
To adjust analog input frequency/voltage
(current) (calibration) Frequency setting voltage
(current) bias and gain
P.T200 to P.T203,
P.T400 to P.T403,
P.M043 Pr.125, Pr.126,
Pr.241, C2 to C7
(Pr.902 to Pr.905)
318
To adjust analog input torque/voltage
(current) (calibration) Torque setting voltage (current)
bias and gain P.T410 to P.T413,
P.M043 Pr.241, C38 to C41
(Pr.932, Pr.933)
323
To assign functions to input terminals
Input terminal function
selection P.T700 to P.T711,
P.T740 Pr.178 to Pr.189,
Pr.699
328
To change the input specification (NO/NC
contact) of input signals
Output stop signal (MRS) /
Inverter run enable signal (X10)
input selection
P.T720 Pr.17 332
To assign start and forward/reverse
commands to different signals Start signal (STF/STR) operation
selection
P.G106 Pr.250 336
Pr. Name Initial value
Setting
range
Description
73
T000
Analog input selection 1
0, 1, 10, 11
Switch 2: V (initial
status)
The terminal 2 input specification (0 to 5 V, 0 to 10
V, 0 to 20 mA) is selectable. Also the reversible
operation setting is selectable.
6, 16 Switch 2: I
267
T001 Terminal 4 input
selection
0
0
Switch 4: I (initial
status)
Terminal 4 input, 4 to 20 mA
1
Switch 4 - V
Terminal 4 input, 0 to 5 V
2 Terminal 4 input, 0 to 10 V