Mitel Inter-Tel Axxess Administrator'S Manual Download Page 84

Page: 84 / 384

Page 68

Administrator Procedures

Inter-Tel

Axxess

Administrator Guide — Issue 11.0, May 2008

Administrator Programming Planning Sheets

STATION PROGRAMMING

Administrator Database Programming Password: ___________________________

Station Information

For each station to be programmed, record the following information.

Do-Not-Disturb Messages

Station Extension #:

Administrator station?

Yes

Attendant station?

Yes

House Phone?

Yes

This station's attendant:

Username:

Toll restriction classes of service:

DEFAULT DND MESSAGE

PRIMARY LANGUAGE

DND MESSAGE

SECONDARY LANGUAGE

DND MESSAGE

MESSAGE 01 (DO-NOT-DISTURB)

MESSAGE 02 (LEAVE A MESSAGE)

MESSAGE 03 (IN MEETING UNTIL)

MESSAGE 04 (IN MEETING)

MESSAGE 05 (ON VACATION/
HOLIDAY 'TIL)

MESSAGE 06 (ON VACATION
HOLIDAY)

MESSAGE 07 (CALL ME AT)

MESSAGE 08 (AT THE DOCTOR)

MESSAGE 09 (ON A TRIP)

MESSAGE 10 (ON BREAK)

MESSAGE 11 (OUT OF TOWN 'TIL)

MESSAGE 12 (OUT OF OFFICE)

MESSAGE 13 (OUT UNTIL)

MESSAGE 14 (WITH A CLIENT)

MESSAGE 15 (WITH A GUEST)

MESSAGE 16 (UNAVAILABLE)

MESSAGE 17 (IN CONFERENCE)

MESSAGE 18 (AWAY FROM DESK)

MESSAGE 19 (GONE HOME)

MESSAGE 20 (OUT TO LUNCH)

Summary of Contents for Inter-Tel Axxess

































































































































































































































































































































































































Search results

Summary of Contents for Inter-Tel Axxess

Reviews:

Mitel Inter-Tel Axxess, Administrator'S Manual, Page: 84 / 384

Search results

Summary of Contents for Inter-Tel Axxess

Reviews: