manualshive.com logo in svg

Mitel Inter-Tel Axxess, Administrator'S Manual, Page: 7 / 384

Share
Download
Mitel Inter-Tel Axxess Administrator'S Manual Download Page 7

NOTICE

This 

Inter-Tel

®

 Axxess

®

 Administrator Guide

 is released by Inter-Tel (Delaware), Inc. as a guide for system 

and voice mail administrators. It provides information necessary to properly administer the system.

The contents of this document reflect current Inter-Tel standards and are subject to revision or change without 
notice. Some features or applications mentioned may require a future release and are not available in this 
release. Future product features and applications are subject to availability and cost. Some features or 
applications may require additional hardware and/or specific software.

The contents of this guide may include technical or other inaccuracies. Inter-Tel reserves the right to make 
revisions or changes without prior notice. Software packages released after the publication of this guide will 
be documented in addenda to the guide or succeeding issues of the guide.

For sales, service, or technical support,

contact your local authorized Inter-Tel provider.

If you have any questions or comments regarding this guide or other technical documentation, contact the 
Technical Publications Department (USA) at:

[email protected]

Inter-Tel

®

 is a registered trademark of Inter-Tel (Delaware), Incorporated.

Mitel

®

 is a registered trademark of Mitel Networks Corporation.

All other trademarks mentioned in this document are the property of their respective owners, including Mitel Networks Corpora-
tion and Inter-Tel (Delaware), Incorporated. All rights reserved.

© 1993-2008 Inter-Tel (Delaware), Incorporated
Personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional
purposes or for creating new collective works for resale or redistribution to servers or lists, or to reuse any copy righted component
of this work in other works must be obtained from Inter-Tel (Delaware), Inc.

Summary of Contents for Inter-Tel Axxess

































































































































































































































































































































































































Reviews:

No comments