manualshive.com logo in svg

Mitel Inter-Tel Axxess, Administrator'S Manual, Page: 8 / 384

Share
Download
Mitel Inter-Tel Axxess Administrator'S Manual Download Page 8

Product Disposal Instructions

This symbol indicates that the product is classified as electrical or electronic equipment and
should not be disposed of with other commercial or household waste at the end of its work-
ing life. For appropriate disposal and recycling instructions, contact your local recycling
authority or Inter-Tel provider.

The Waste of Electrical and Electronic Equipment (WEEE) Directive (2002/96/EC) was established by the Euro-

pean Union to minimize negative impact on the environment, control hazardous substances, and curtail landfill expansion by using
the best available recovery and recycling techniques.

Summary of Contents for Inter-Tel Axxess

































































































































































































































































































































































































Reviews:

No comments