manualshive.com logo in svg

Mitel Inter-Tel Axxess, Administrator'S Manual, Page: 201 / 384

Share
Download
Mitel Inter-Tel Axxess Administrator'S Manual Download Page 201

Page  185

Station-To-Station Calling

System Features

Inter-Tel

® 

Axxess

® 

Administrator Guide — Issue 11.0,

 

May 2008

STATION-TO-STATION CALLING

Stations can make and receive intercom calls as described below.

Receiving Intercom Calls

To receive an intercom call on an Inter-Tel endpoint:

If you hear a double tone and a call announcement (handsfree call),

 and the Speaker button is

lit, respond handsfree or lift the handset. (Display endpoints show 

 TO 

(username) 

to

identify the source of the call.)

If you hear repeating double tones (private call),

 lift the handset, or press the Speaker,

, or 

 button to respond handsfree. (Display endpoints show INTERCOM

CALL FROM 

(username)

 to identify the source of the call.)

Executive Display, Professional Display, and Model 8560 endpoints: 

Instead of answering

the call, you may press one of the following menu buttons:

•

SEND TO V-MAIL: This option appears only if you have a Voice Mailbox. Pressing
this button sends the call directly to your mailbox greeting.

•

IC CALL TO DND: Pressing this button will send Do-Not-Disturb tones to the caller
and allow you to program a Do-Not-Disturb message. If using a display endpoint, the
caller will see DO-NOT-DISTURB. (See 

page 265

 for detailed instructions on using

Do-Not-Disturb.)

To receive an intercom call on a single-line set:

When you hear repeating double tones, lift the handset.

To receive a transferred-to-hold intercom call:

If the station does not have an 

 button, the call will appear under a Call button.

Inter-Tel Endpoints:

 When the 

 button (or Call button) is fluttering and the display

shows 

(calling station)

 TFR FROM 

(transferring station)

, lift the handset and press the

 button (or Call button). Or, while on-hook, press the 

 button (or Call button) to

speak handsfree. You are connected to the caller. (Executive Display, Professional Display,
Model 8560 endpoints, and some Executone endpoint users have the same menu button
options as described for a ringing intercom call.)

Single-Line Sets:

 When you hear a page announcing that a call is holding at your station, lift

the handset (at your station) and enter the Individual Hold feature code (336). You are con-
nected to the caller.

IC

ANSWER

IC

IC

IC

IC

IC

Summary of Contents for Inter-Tel Axxess

































































































































































































































































































































































































Reviews:

No comments