manualshive.com logo in svg

Mitel Inter-Tel Axxess, Administrator'S Manual, Page: 253 / 384

Share
Download
Mitel Inter-Tel Axxess Administrator'S Manual Download Page 253

Page  237

System Forward Enable/Disable

System Features

Inter-Tel

® 

Axxess

® 

Administrator Guide — Issue 11.0,

 

May 2008

If an infinite forward loop results
from the combination of manual for-
wards and system forwarding paths,
t h e   s t a t i o n   t h a t   w a s   o r i g i n a l l y
intended to receive the call will ring,
even if the station is in Do-Not-Dis-
turb.

SYSTEM FORWARD ENABLE/DISABLE

The station user has the option of entering feature codes that will disable or enable the use of
system forwarding at that station. Note that this flag does not affect the station’s appearance on
any other station’s call forwarding path. The flag merely determines whether the station will
have its own calls system forwarded.

To enable or disable system forwarding:

Inter-Tel Endpoints: 

Enter the System Forward On (352), System Forward Off (353), or Sys-

tem Forward On/Off (354) feature code. The display shows SYSTEM FORWARD ON (or
OFF). If disabled, the system will ignore any system forwarding paths programmed for this
endpoint until you re-enable system forwarding.

Single-Line Sets: 

Lift the handset and enter the System Forward On (352), System Forward

Off (353), or System Forward On/Off (354) feature code. If disabled, the system will ignore
any system forwarding paths programmed for this endpoint until you re-enable system for-
warding.

INFINITE LOOP CAUSED BY
SYSTEM AND MANUAL CALL FORWARD

MANUAL

FORWARD

MANUAL

SYSTEM

Calls received by this station
will not follow the manual
forward if other two stations are
unavailable.

Summary of Contents for Inter-Tel Axxess

































































































































































































































































































































































































Reviews:

No comments