Mitel Inter-Tel Axxess, Administrator'S Manual, Page: 276 / 384

Page 260
System Features
Inter-Tel
®
Axxess
®
Administrator Guide — Issue 11.0, May 2008
Redialing
The interaction of the House Phone Mode flag with the programmed speed-dial number and
system feature is shown below.
REDIALING
The Redial feature can store one telephone number in redial memory at the station. If the sta-
tion user reaches a busy number, is disconnected, or if there is no answer, the number can be
redialed easily. The station user simply lifts the handset and presses the
button or
enters the Redial feature code. A trunk access code is automatically entered, and the telephone
number is redialed. (If redialing while still connected to an outside call, the connection is
dropped, and the trunk is re-seized before the number is dialed.)
Only one telephone number can be stored in the station’s redial memory at a time. This number
can be stored in one of two ways, depending on station programming:
•
Last number saved: The desired number is manually stored in redial memory by the
station user. Dialing other numbers does not change the stored number. It only changes
when a new number is stored.
•
Last number dialed: The last number manually dialed or speed dialed is automatically
stored. It changes every time the user dials a telephone number. (This is the default
value of the Redial feature.)
The Last Number Saved and Last Number Dialed features work differently depending on the
station status when it is used, as shown in the table below. Individual station programming
determines the mode of the Redial feature (Last Number Dialed or Last Number Saved). The
Redial feature code (380) performs the redial function (programmed under the
button).
Table 29. House Phone Flag Settings
SITUATION DAY/NIGHT # NORMAL MODE RESTRICTED MODE
House phone user lifts
the handset Complete
extension Dials the extension number Dials the extension number
House phone user lifts
the handset Blank User receives intercom dial tone User receives reorder tone
House phone user lifts
the handset Incomplete
extension num-
ber System dials the partial number
and waits for further digits System dials partial number, then
times out after Long Interdigit
timer expires, and sends reorder
tones
House phone is con-
nected to ARS, and the
user performs a hook-
flash/recall Dials an outside
number using
ARS System inserts a hookflash/recall
in the number and registers end-
of-dialing System restarts ARS by clearing
the number and returns outside
dial tone to the user
House phone is con-
nected to an outside
call, and the user per-
forms a hookflash/recall N/A The call is placed on consultation
hold, and the user hears inter-
com dial tone The trunk dials a hookflash/
recall, and toll restriction is
restarted
Party the house phone
is connected to hangs
up before the house
phone user N/A User receives intercom dial tone
and can use another feature
code or dial a number System redials the house phone
digits after the SL Wait for Dis-
connect timer expires
REDIAL
REDIAL