Mitel Inter-Tel Axxess Administrator'S Manual Download Page 51

Page: 51 / 384

Page 35

Administrator Procedures

Inter-Tel

Axxess

Administrator Guide — Issue 11.0, May 2008

Trunk Programming

If a system reset is required,

the display shows ENTER SYS RESET OPTION. Do one

of the following:

•

Delayed Reset:

Press

or the

DELAYED

menu button to delay the reset. The

display shows DELAYED RESET SCHEDULED. The system will be reset at the
pre-programmed time.

•

Immediate Reset:

Press

or the

IMMEDIATE

menu button to reset the system

now.

NOTE:

A system reset will drop all calls in progress.

Summary of Contents for Inter-Tel Axxess

































































































































































































































































































































































































Search results

Summary of Contents for Inter-Tel Axxess

Reviews:

Mitel Inter-Tel Axxess, Administrator'S Manual, Page: 51 / 384

Search results

Summary of Contents for Inter-Tel Axxess

Reviews: