manualshive.com logo in svg

Mitel Inter-Tel Axxess, Administrator'S Manual, Page: 126 / 384

Share
Download
Mitel Inter-Tel Axxess Administrator'S Manual Download Page 126

Page  110

System Hardware

Inter-Tel

® 

Axxess

® 

Administrator Guide — Issue 11.0, May 2008

Optional System Equipment

Playback devices:

 A playback device (answering machine) can be used in place of the voice

processing system interface to help process calls. The device answers a call, plays a message,
then disconnects from the call (or transfers it to a hunt group) to allow the caller access to other
system resources.

Power failure transfer equipment:

 Power failure transfer equipment can be installed to con-

nect one or more single-line sets to predetermined trunks during a power or system failure.

Night transfer equipment:

 Night transfer equipment can be installed to turn on or off lights,

an alarm system, or other devices.

Summary of Contents for Inter-Tel Axxess

































































































































































































































































































































































































Reviews:

No comments