Mitel Inter-Tel Axxess, Administrator'S Manual, Page: 189 / 384

Page 173 Volume Controls
System Features
Inter-Tel
®
Axxess
®
Administrator Guide — Issue 11.0, May 2008
•
To change alerting tone (ring tone) volume on a digital endpoint: Adjust the
volume while the endpoint is ringing or idle. OR, while on-hook, press both edges
of the volume button to hear the currently programmed volume. Then adjust the
volume.
•
To change alerting tone (ring tone) volume on an analog endpoint: Adjust the
volume while the endpoint is ringing or idle. OR, while on-hook, press the pound
button ( ) to hear the currently programmed volume. Then adjust the volume.
NOTE:
The selected alert tone volume level is automatically saved.
•
To change handset progress tone volume: Press the desired arrow while listen-
ing to intercom dial tone through the handset.
•
To change speakerphone progress tone volume: Press the desired arrow while
listening to intercom dial tone through the speakerphone.
2. To save the setting on a digital endpoint: Press both edges of the volume button at the
same time. The display shows VOLUME SAVED.
To save the setting on an analog endpoint: Press the pound ( ),
SAVE
, or
ACCEPT
button. The display shows VOLUME SAVED.
If this step is not performed, the endpoint will return to the previous volume level when
the call or tone ends (except for the ringing alert tone or background music volume,
which is automatically saved at the most recent volume level).
To return an Inter-Tel endpoint to default volume levels:
While on- or off-hook, enter the Default Station feature code (394). If off-hook, hang up. The
display shows STATION DEFAULTED.
NOTE:
Entering this feature code also cancels Do-Not-Disturb, manual call forwarding, back-
ground music, ring intercom always, all calls following account code, headset mode, and queue
requests; and restores handsfree mode, pages, hunt group calls, and system forwarding.
#
#