manualshive.com logo in svg

Mitel Inter-Tel Axxess, Administrator'S Manual, Page: 19 / 384

Share
Download
Mitel Inter-Tel Axxess Administrator'S Manual Download Page 19

Inter-Tel Software Licensing

Page 3

Overview

Inter-Tel

® 

Axxess

® 

Administrator Guide — Issue 11.0, May 2008

INTER-TEL SOFTWARE LICENSING

The Software License folder displays the licenses currently uploaded to the system. The fea-
tures common to all licenses are displayed in this folder along with the value for each feature
according to the current software license. This folder is read-only. If there is no license loaded
or the current license on the system is invalid, and if connected to Database Programming in
remote mode, then the fields will display with a red “X” over them. The available software
license features are listed in 

Table 2

 below.

Table 2. 

Available Software License Features 

FIELD

DESCRIPTION

ACD Hunt Group

Indicates whether or not the ACD Hunt Groups software 
license is uploaded to the system.

Advanced CO Interfaces

Indicates whether or not the Advanced CO Interfaces 
software license is uploaded to the system.

Agent Help

Indicates whether or not the Agent Help software 
license is uploaded to the system.

Analog Voice Mail Hunt Group

Indicates whether or not the Analog Voice Mail Hunt 
Group software license is uploaded to the system.

Automatic Route Selection

Indicates whether or not the Automatic Route Selection 
software license is uploaded to the system.

Category A Endpoints

Indicates how many Category A endpoint licenses are 
uploaded to the system.

Category B Endpoints

Indicates how many Category B endpoint licenses are 
uploaded to the system.

CPS Redundancy

Indicates whether or not the CPS Redundancy software 
license is uploaded to the system.

Desktop Interface

Indicates whether or not the Desktop Interface software 
license is uploaded to the system.

Directories

Indicates whether or not the Directories software license 
is uploaded to the system.

Inter-Tel Messaging IP Networking

Indicates whether or not the Inter-Tel Messaging IP Net-
working software license is uploaded to the system.

IP Networking

Indicates how many IP networking licenses are 
uploaded to the system.

Multilingual Support

Indicates whether or not the Multilingual Support soft-
ware license is uploaded to the system.

Remote Automatic Call Distribu-
tion Hunt Groups

Indicates whether or not the Remote Automatic Call Dis-
tribution Hunt Groups software license is uploaded to 
the system.

SIP Trunks

Indicates how many SIP trunk licenses are uploaded to 
the system.

System Forwarding

Indicates whether or not the System Forwarding soft-
ware license is uploaded to the system.

System OAI Events

Indicates whether or not the System OAI Events soft-
ware license is uploaded to the system.

System OAI Third Party Call Con-
trol

Indicates whether or not the System OAI Third Party 
Call Control software license is uploaded to the system.

Summary of Contents for Inter-Tel Axxess

































































































































































































































































































































































































Reviews:

No comments