Mitel Inter-Tel Axxess, Administrator'S Manual, Page: 261 / 384

Page 245 Viewing System Speed Dial Numbers
System Features
Inter-Tel
®
Axxess
®
Administrator Guide — Issue 11.0, May 2008
Viewing System Speed Dial Numbers
To view system speed-dial numbers and names:
NOTE:
If you make a mistake, use the button to backspace.
1.
While on-hook, press or enter the System-Speed Dial feature code (381). The
display shows REVIEW SYS SPEED # (000-999).
2.
Enter the desired location code (000-999) or press the SEARCH menu button. The dis-
play shows the programmed name and number.
3.
If desired, scroll forward through the speed-dial locations in alphabetical order by press-
ing the high end of the volume button or the NEXT button, or scroll backward by press-
ing the low end of the volume button or the PREVIOUS button.
4.
Repeat steps 2 and 3 for each speed-dial location to be viewed. Or, press or CAN-
CEL to terminate this feature.
5.
To automatically select a trunk and dial the displayed number, press .
Dialing System Speed Dial Numbers
To dial system speed-dial numbers at an Inter-Tel endpoint:
1. If desired, lift the handset and select an outgoing trunk. (You may skip this step.)
2.
Press or enter the System Speed Dial feature code (381). The display shows
REVIEW SYS SPEED # (000-999). Non-display endpoint users hear a confirmation
tone.
3.
Enter the location code (000-999) for the desired number. If you have not selected a
trunk, press or the ACCEPT menu button to accept the number and automatically
select a trunk. Or, press the ARS button, a trunk button, a trunk group button, or the
button to select a trunk. The number is automatically dialed. (Display end-
points show the number dialed unless it is a non-display number.) If you hear reorder
tones,
your station is restricted from dialing the selected number. If the display shows
INVALID BIN NUMBER, you entered an invalid speed-dial location code.
To dial system speed-dial numbers at a single-line set:
1.
Lift the handset and select an outgoing trunk.
2. Hookflash/Recall and enter the System Speed Dial feature code (381). You hear a con-
firmation tone.
3. Enter the location code (000-999) for the desired number. The number is automatically
dialed. If you hear reorder tones,
your station is restricted from dialing the selected
number.
MUTE
SYS SPDL
#
SYS SPDL
#
OUTGOING