manualshive.com logo in svg

Mitel Inter-Tel Axxess, Administrator'S Manual, Page: 61 / 384

Share
Download
Mitel Inter-Tel Axxess Administrator'S Manual Download Page 61

Page 45

Administrator Procedures

Inter-Tel

® 

Axxess

® 

Administrator Guide — Issue 11.0, May 2008

Clearing Alarms

Clearing Alarms

An Administrator can clear a network-wide alarm on the local node only or on every node in
the network. To clear an alarm, you can use either the Administrator feature codes or the menu
buttons on your endpoint.

To use the feature codes to clear alarms:

Enter the appropriate feature code to clear the alarm. The clear alarms feature codes are as fol-
lows:

•

Clear Network Alarm (9851): 

This feature code clears network-wide alarms on every

node in the network, but will not affect system alarms. The Clear Network Alarm fea-
ture code may be entered on any node in the network, but the Send Network Alarms
flag must be set for you to clear alarms on other nodes in the network.

•

Clear System Alarm (9850): 

This feature code clears all local and network-wide sys-

tem alarm displays on your node.

After you enter the feature code, the display shows SYSTEM (or NETWORK) ALARM
CLEARED, and the highest priority alarm is cleared. If another alarm is active, the display
shows that alarm. Enter the feature code again to clear the next alarm in the queue (only one
alarm is cleared at a time). When all alarms are cleared next highest priority alarm is displayed. 

To use menu buttons to clear alarms: 

•

EITHER

, Press CLEAR ALARM to clear the currently displayed alarm. The display

shows SYSTEM (or NETWORK) ALARM CLEARED, and the next highest priority
alarm is displayed. If there are no more alarms, the display shows the idle menu. 

•

OR

, Press CLEAR ALL ALARMS to clear all alarms. The display shows ALL

ALARMS CLEARED, and the idle menu is shown.

NOTE:  

You can press IDLE MENU at any time to view the idle menu instead of the clear alarm

menu.

Summary of Contents for Inter-Tel Axxess

































































































































































































































































































































































































Reviews:

No comments