any additional keys.
21. Start the engine with key 1.
22. Verify that the security light and keyless warning light operate as follows:
From the point when the ignition switch is turned to the ON position, the security light illuminates
for approx. 3 s
, and goes out.
The keyless warning light illuminates when the ignition switch is turned to the ON position, and the
light goes out after
approx. 1 s,
and then displays the number of the programmed keys.
Fig. 27: Security Light And Keyless Warning Light Blinking Pattern
Courtesy of MAZDA MOTORS CORP.
23. After verifying that the keyless warning light goes out, turn the ignition switch to the LOCK position
using key 1, and then remove the key.
24. Repeat Steps 22-23 using key 2 instead of key 1.
25. Start the engine using the card key.
26. Verify that the security light and keyless warning light operate as follows:
From the point that ignition switch is turned to the ON position, the security light illuminates
for
NOTE:
Perform Steps 22-23 as well when three or more keys are to be
programmed.
CAUTION:
Remove any key from the key cylinder.
2007 Mazda MX-5 Miata Sport
2007 ACCESSORIES & BODY, CAB Security and Locks (Advanced Keyless System) - MX-5 Miata
Microsoft
Thursday, July 09, 2009 3:36:54 PM
Page 26
© 2005 Mitchell Repair Information Company, LLC.
