1. Align the tripod joint with the shaft mark and insert it using a brass bar.
Fig. 15: Aligning Tripod Joint With Shaft Mark
Courtesy of MAZDA MOTORS CORP.
2. Install the new snap ring to the shaft installation slot securely using a snap ring pliers.
TRIPOD JOINT SOCKET ASSEMBLY NOTE
1. Fill the outer ring and boot (differential side) with the repair kit grease.
Grease amount
135-155 g {4.77-5.46 oz.}
2. Assemble the outer ring.
3. Release any trapped air from the boots by carefully lifting up the small end of each boot with a cloth
wrapped screwdriver.
CAUTION:
To prevent damage to the component, do not tap the roller part
when installing.
NOTE:
Do not touch the grease with your hand. Apply it from the tube to
prevent foreign matter from entering the boot.
2007 Mazda MX-5 Miata Sport
2007 DRIVELINE/AXLES Drive Shaft - MX-5 Miata
Microsoft
Thursday, July 09, 2009 3:10:21 PM
Page 16
© 2005 Mitchell Repair Information Company, LLC.
