Fig. 37: Installing SST To Camshaft
Courtesy of MAZDA MOTORS CORP.
3. Remove the retaining wire or paper clip from the chain tensioner to apply tension to the timing chain.
ENGINE FRONT COVER INSTALLATION NOTE
1. Apply silicone sealant to the engine front cover as shown in
Fig. 38
.
Thickness
A: 2.0-3.0 mm {0.079-0.118 in}
B: 1.5-2.5 mm {0.059-0.098 in}
NOTE:
Install the front oil seal before performing the following procedure.
CAUTION:
Install the engine front cover within 10 minutes of applying the
silicone sealant.
Silicone sealant is not need in area C as indicated below due to
an existing.
2007 Mazda MX-5 Miata Sport
2007 ENGINE Mechanical - MX-5
Microsoft
Thursday, July 09, 2009 3:21:51 PM
Page 42
© 2005 Mitchell Repair Information Company, LLC.
