9. If the backlash is not within the specification, adjust the gear case component by moving it in the axial
direction.
BEARING CAP ASSEMBLY NOTE
1. Align the bearing cap alignment marks and assemble the bearing cap with the arrow facing outward.
Tightening torque
72.6-106.9 N.m {7.41-10.91 kgf.m, 53.5-78.84 ft.lbf}
Fig. 46: Measuring Backlash At 4 Locations Around Ring Gear
Courtesy of MAZDA MOTORS CORP.
NOTE:
When moving the gear case component in the axial direction, replace
the adjustment shims. If the adjustment shim on the right side is
replaced with one that is 0.05 mm {0.0020 in} thicker, replace the one
on the left with one that is 0.05 mm {0.0020 in} thinner.
2007 Mazda MX-5 Miata Sport
2007 DRIVELINE/AXLES Differential - MX-5 Miata
Microsoft
Thursday, July 09, 2009 3:11:17 PM
Page 48
© 2005 Mitchell Repair Information Company, LLC.
