4. Assemble the differential gear case component and the side bearing race to the differential carrier.
5. Tap the selected adjustment shim between the differential carrier and the side bearing race with a plastic
hammer as shown in
Fig. 44
.
Fig. 44: Tapping Selected Adjustment Shim Between Differential Carrier & Side Bearing Race
With Plastic Hammer
Courtesy of MAZDA MOTORS CORP.
6. Align the bearing cap alignment marks, assemble the bearing cap, and then temporarily tighten the bolts.
7. Install the dial gauge with the measuring probe of the dial gauge attached perpendicularly to the end of
one of the ring gear teeth.
590
5.90 {0.232}
640
6.40 {0.252}
595
5.95 {0.234}
650
6.50 {0.256}
600
6.00 {0.236}
-
-
NOTE:
If the adjustment shims are to be reused, assemble the left and right
shims that were identified during disassembly.
When assembling the side bearing races, do not mix the left and right
side bearings that were identified during disassembly.
2007 Mazda MX-5 Miata Sport
2007 DRIVELINE/AXLES Differential - MX-5 Miata
Microsoft
Thursday, July 09, 2009 3:11:17 PM
Page 46
© 2005 Mitchell Repair Information Company, LLC.
