Fig. 12: Removing/Installing Passenger-Side Air Bag Module (With Torque Specifications)
Courtesy of MAZDA MOTORS CORP.
6. Install in the reverse order of removal.
7. Turn the ignition switch to the ON position.
8. Verify that the air bag system warning light illuminates for
approx. 6 s
and goes out.
If the air bag system warning light does not operate, refer to
RESTRAINTS -- ON-BOARD
DIAGNOSTIC
system (air bag system) and perform inspection of the system.
PASSENGER-SIDE AIR BAG MODULE REMOVAL NOTE
1. Remove the passenger-side air bag module in the order indicated below.
1. Disengage the tab locks by sliding the passenger-side air bag module upward.
2. Slide the passenger-side air bag module rearward.
3. Remove the passenger-side air bag module by pulling it from the backside and then down.
Fig. 13: Removing Passenger-Side Air Bag Module
Courtesy of MAZDA MOTORS CORP.
CONNECTOR REMOVAL NOTE
1. Using a flathead screwdriver, pry out the connector stopper plate.
2007 Mazda MX-5 Miata Sport
2007 RESTRAINTS Air Bag System - MX-5 Miata
Microsoft
Thursday, July 09, 2009 2:12:55 PM
Page 15
© 2005 Mitchell Repair Information Company, LLC.
