REMOVAL/INSTALLATION
.)
2. Inspect the front lower arm for bending or damage. If there is any malfunction, replace it.
3. Inspect the ball joint for excessive play. If there is any malfunction, replace the front lower arm.
4. Rotate the ball joint
5 times
.
5. Measure the ball-joint rotational torque using an Allen wrench and a torque wrench.
Front lower arm ball joint rotational torque
0.4-2.9 N.m {5-29 kgf.cm, 4-25 in.lbf}
If not within the specification, replace the front lower arm. (See
FRONT LOWER ARM
REMOVAL/INSTALLATION
.)
Fig. 24: Measuring Ball-Joint Rotational Torque
Courtesy of MAZDA MOTORS CORP.
FRONT UPPER ARM INSPECTION
1. Remove the front upper arm from the vehicle. (See
FRONT UPPER ARM
REMOVAL/INSTALLATION
.)
2. Inspect the front upper arm for bending or damage. If there is any malfunction, replace it.
3. Inspect the ball joint for excessive play, and if there is any malfunction, replace the front upper arm.
4. Rotate the ball joint
5 times
.
2007 Mazda MX-5 Miata Sport
2007 SUSPENSION Front Suspension - MX-5 Miata
Microsoft
Thursday, July 09, 2009 1:49:57 PM
Page 23
© 2005 Mitchell Repair Information Company, LLC.
