Fig. 25: Security Light And Keyless Warning Light Blinking Pattern
Courtesy of MAZDA MOTORS CORP.
18. After verifying that the keyless warning light goes out, turn the ignition switch to the LOCK position
using key 1.
19. Repeat Steps 17-18 using key 2 instead of key 1.
20. Start the engine with the card key and remove any key from the key cylinder.
21. Verify that the security light and keyless warning light operate as follows:
From the point when the ignition switch is turned to the ON position, the security light illuminates
for approx. 3 s
, and goes out.
The keyless warning light illuminates when the ignition switch is turned to the ON position, and
after
approx. 1 s
after the engine is started, it goes out.
22. Turn the ignition switch to the LOCK position after verifying that the keyless warning light goes out.
NO. 4 KEY ADDITIONAL PROGRAMMING PROCEDURE CHANGING
NOTE:
Perform Steps 17-18 as well when there are three or more
programmed keys.
CAUTION:
Remove any key from the key cylinder.
NOTE:
This procedure is performed for enabling/disabling the "No.1 Additional
2007 Mazda MX-5 Miata Sport
2007 ACCESSORIES & BODY, CAB Security and Locks (Advanced Keyless System) - MX-5 Miata
Microsoft
Thursday, July 09, 2009 3:36:54 PM
Page 22
© 2005 Mitchell Repair Information Company, LLC.
