Fig. 18: Identifying Adjusting Bolt Of SST
Courtesy of MAZDA MOTORS CORP.
2. Crimp the boot band (small-size) using the
SST.
3. Verify that the crimp value B is within the specification.
If the crimp value B exceeds the specification, reduce opening length A of the
SST
and recrimp the
boot band.
If the crimp value B is less than the specification, increase opening length A of the
SST
and crimp
the new boot band.
Specification B
2.4-2.8 mm {0.095-0.110 in}
4. Verify that the boot band does not protrude from the boot band installation area.
If the boot band protrudes from the installation area, replace it with a new band and repeat Step 2
thru 4.
2007 Mazda MX-5 Miata Sport
2007 DRIVELINE/AXLES Drive Shaft - MX-5 Miata
Microsoft
Thursday, July 09, 2009 3:10:21 PM
Page 19
© 2005 Mitchell Repair Information Company, LLC.
