7. Select "BODY/SECURITY/PATS functions" from the M-MDS screen menu.
8. Select "Program additional ignition key" from the M-MDS screen menu.
In this procedure, the necessary number of the keys are completely programmed. To finish the
additional key programming, go to Step 13.
If additional keys need to be programmed, go to the next step.
9. Perform the security access according to the directions on the M-MDS screen. (See
SECURITY
ACCESS PROCEDURE[ADVANCED KEYLESS SYSTEM]
.)
10. After verifying that the PATS function menu is displayed again on the M-MDS screen, turn the ignition
switch to the LOCK position and remove key 1.
11. Using the key to be programmed, turn the ignition switch to the ON position.
12. Return to the Step 6.
13. After verifying that the PATS function menu is displayed again on the M-MDS screen, select the "Exit
(From This Menu)" to finish the M-MDS procedure.
14. After Step 10, wait
5 s or more
, and then turn the ignition switch to the LOCK position.
NO.3 PCM REPLACEMENT PROCEDURE
Condition
Have two or more keys to be programmed after the key ID number clearing.
Procedure
not indicate an improper procedure. Continue to perform the
procedure as indicated.
NOTE:
After selecting the above menu, "operation is successful" is
displayed. At this point, the key that turned the ignition switch to the
ON position is completely programmed.
CAUTION:
Before starting Step 1, complete the procedure for PCM replacement.
2007 Mazda MX-5 Miata Sport
2007 ACCESSORIES & BODY, CAB Security and Locks (Advanced Keyless System) - MX-5 Miata
Microsoft
Thursday, July 09, 2009 3:36:54 PM
Page 20
© 2005 Mitchell Repair Information Company, LLC.
