6. Press the UNLOCK button on card key 2.
7. From the ignition switch in the ON position, switch the ignition switch in the order indicated below.
ACC-->ON-->ACC-->ON-->ACC-->ON
8. Open the driver-side front door, press the door switch
twice
, and then close the door.
9. Press the UNLOCK button on the unprogrammed card key
twice.
10. If programming more card keys, remove the supplementary key once, and then repeat the procedure from
Step 2.
USING M-MDS
1. Fully lower the driver-side door glass.
2. Connect the M-MDS to the DLC-2.
3. Pull out the M-MDS cable from the door glass opening and set the M-MDS outside the vehicle.
Fig. 42: Identifying DLC-2 Connector
Courtesy of MAZDA MOTORS CORP.
4. After the vehicle is identified, select the following items from the initialization screen of the M-MDS.
NOTE:
After Step 3 is completed and the card key programming mode is
activated, the door lock actuator operates to lock, and then operates
to unlock.
If the door lock actuator does not operate, repeat the procedure from
Step 2.
NOTE:
After Step 8 is completed and the card key is programmed, the door
lock actuator operates to lock, and then operates to unlock.
CAUTION:
Protect the cable and body contact area with a clean rag,
otherwise they could be damaged.
2007 Mazda MX-5 Miata Sport
2007 ACCESSORIES & BODY, CAB Security and Locks (Advanced Keyless System) - MX-5 Miata
Microsoft
Thursday, July 09, 2009 3:36:54 PM
Page 42
© 2005 Mitchell Repair Information Company, LLC.
