CARD KEY ID CODE REGISTRATION[ADVANCED KEYLESS SYSTEM]
WITH TWO PROGRAMMED CARD KEYS
1. Bring the programmed card keys (2) and a unprogrammed card key into the vehicle.
2. Close all doors.
3. Insert the supplementary key into the ignition key cylinder.
4. Turn the ignition switch to the ON position.
5. Press the UNLOCK button on card key 1.
4AA
HS-CAN-
PCM
Inspect for
continuity to
PCM.
Inspect for
continuity to
instrument
cluster.
Continuity detected -
(1)
With immobilizer system
(2)
With exterior open function (Power window system)
CAUTION:
Do not place the following devices in the vehicle while programming,
otherwise programming cannot be performed.
M-MDS
Personal computer
Device that can send/receive radio waves
Verify that the other transmitter is not being operated around the
servicing area during card key programming.
NOTE:
Use the M-MDS and start programming if the condition corresponds to the
following:
One or No Programmed Card Keys
Keyless control module is replaced
If six card keys are already programmed, the programming mode does not
activate. If programming is needed, use the M-MDS to erase the
unnecessary card key programming.
NOTE:
Complete the procedures up to Step 7 within 30 s after the
supplementary key is inserted.
2007 Mazda MX-5 Miata Sport
2007 ACCESSORIES & BODY, CAB Security and Locks (Advanced Keyless System) - MX-5 Miata
Microsoft
Thursday, July 09, 2009 3:36:54 PM
Page 41
© 2005 Mitchell Repair Information Company, LLC.
