Condition
Have two or more valid keys.
Procedure
Fig. 23: Identifying Valid Key And Key For Registration
Courtesy of MAZDA MOTORS CORP.
1. Prepare key 3 for programming.
2. Start the engine using key 1.
3. Verify that the security light illuminates for
approx. 3 s
, and then goes out.
CAUTION:
Do not place the following devices in the vehicle while programming,
otherwise programming cannot be performed:
Card key
M-MDS
Personal computer
Devices that can send/receive the radio waves
NOTE:
A maximum of eight keys can be programmed for one vehicle. If key
programming is not successful and DTC 15 appears even though the
procedure was performed properly, use the PID/data monitor function of
the M-MDS and verify the number of keys that have been programmed.
If eight keys have already been programmed, and it is necessary to
program other keys, the previously programmed key ID numbers must
first be cleared. To clear the key, refer to "NO.3 PCM REPLACEMENT
PROCEDURE".
2007 Mazda MX-5 Miata Sport
2007 ACCESSORIES & BODY, CAB Security and Locks (Advanced Keyless System) - MX-5 Miata
Microsoft
Thursday, July 09, 2009 3:36:54 PM
Page 18
© 2005 Mitchell Repair Information Company, LLC.
