Fig. 172: Measuring Retaining Plate Travel Distance At Both Ends Across Diameter Using Dial
Gauge
25. Using a flathead screwdriver, install the snap ring (C3) to the C2, C3 clutch drum.
26. Apply ATF to the retaining plate (C3), the driven plate (C3), the drive plate (C3).
1
3.05-3.15{0.120-0.124}
2
3.15-3.25{0.124-0.128}
3
3.25-3.35{0.128-0.132}
4
3.35-3.45{0.132-0.136}
5
3.45-3.55{0.136-0.140}
6
3.55-3.65{0.140-0.144}
7
3.65-3.75{0.144-0.148}
8
3.75-3.85{0.148-0.152}
CAUTION:
If the C2 clutch pack clearance exceeds the maximum
specification, select another retaining plate.
CAUTION:
When installing the snap ring, set the end gap of the snap ring
as shown in the figure.
2007 Mazda MX-5 Miata Sport
2006-08 TRANSMISSION Automatic Transmission Overhaul - MX-5 Miata & RX-8
Microsoft
Thursday, July 09, 2009 1:42:24 PM
Page 77
© 2005 Mitchell Repair Information Company, LLC.
