Fig. 31: Pressing Front Bearing Outer Race Into Differential Carrier Using SST & Press
Courtesy of MAZDA MOTORS CORP.
SPACER ASSEMBLY NOTE
Pinion Height Adjustment
1. Assemble the spacer, bearing inner race (rear side), and the
SST
(O-ring) to the
SST
(49 8531 565) as
shown in
Fig. 32
.
NOTE:
Use the installed spacer when adjusting.
Install the spacer with the chamfer on the SST side.
2007 Mazda MX-5 Miata Sport
2007 DRIVELINE/AXLES Differential - MX-5 Miata
Microsoft
Thursday, July 09, 2009 3:11:17 PM
Page 32
© 2005 Mitchell Repair Information Company, LLC.
