3. Prepare the output state control function for actuators or relays that you are inspecting.
4. Vibrate the actuator or relay with your finger for
3s
after output state control function is activated.
If variable click sound is heard, check for poor connection or poorly mounted actuator or both, or
the relay.
Fig. 10: Vibrating Actuator Or Relay
Courtesy of MAZDA MOTORS CORP.
WATER SPRINKLING METHOD
If malfunction occurs only under high humidity or rainy/snowy weather, perform the following steps:
NOTE:
Vibrating relays too strongly may result in open relays.
CAUTION:
Indirectly change the temperature and humidity by spraying water
onto the front of the radiator.
If a vehicle is subject to water leakage, the leakage may damage the
control module. When testing a vehicle with a water leakage problem,
special caution must be used.
2007 Mazda MX-5 Miata Sport
2007 ENGINE PERFORMANCE Symptom Troubleshooting - MX-5 Miata
Microsoft
Thursday, July 09, 2009 2:42:11 PM
Page 122
© 2005 Mitchell Repair Information Company, LLC.
