NO. 3 FLAT TIRE WARNING LIGHT (FLAT TIRE WARNING) ILLUMINATES
SYMPTOM TROUBLESHOOTING HINTS
DIAGNOSTIC PROCEDURE
NO.4 WHEEL UNIT ID REGISTRATION CANNOT BE PERFORMED (TPMS
WARNING LIGHT FLASHES)
SYMPTOM TROUBLESHOOTING HINTS
DIAGNOSTIC PROCEDURE
NOTE:
When the DTC clear command of the M-MDS or equivalent is operated, the
flat tire warning light can be turned off.
The FFD (temperature and pressure) stored when the flat tire warning light
is turned on or off can be verified by operating the M-MDS or equivalent.
3 Flat tire warning light (flat tire warning) illuminates.
[TROUBLESHOOTING HINTS]
Flat tire
STEP
INSPECTION
ACTION
1
IDENTIFY THE FLAT TIRE
Can the flat tire be identified by a visual check
or using a digital gauge?
Yes
Replace the flat tire, and then go tot the
next step.
No Go to the next step.
2
DOES THE FLAT TIRE WARNING LIGHT
TURN OFF?
Adjust the tire pressure, and then drive the
vehicle at
25 km/h {15.5 mph}
or
more for 10
min of more
.
Yes Troubleshooting completed.
No
Verify troubleshooting again and return
to Step 1 if the malfunction recurs.
CAUTION:
Active the wheel unit ID registration mode using the M-MDS or
equivalent, and perform the following steps if the TPMS warning light
does not turn off after driving at 25 km/h {15.5 mph} or more for 10
min or more.
4 Wheel unit ID registration cannot be performed (TPMS warning light flashes).
[TROUBLESHOOTING HINTS]
New wheel unit malfunction (caused when installing to wheel)
Any malfunction on an old wheel unit which has not been replaced.
2007 Mazda MX-5 Miata Sport
2007 SUSPENSION Symptom Troubleshooting - MX-5 Miata
Microsoft
Thursday, July 09, 2009 1:51:04 PM
Page 7
© 2005 Mitchell Repair Information Company, LLC.
