Fig. 43: Identifying DLC-2 Connector
Courtesy of MAZDA MOTORS CORP.
4. After the vehicle is identified, select the following items from the initialization screen of the M-MDS.
When using the IDS (laptop PC)
1. Select "BODY"
2. Select "SECURITY"
When using the PDS (Pocket PC)
1. Select "Programming".
5. Then, select items from the screen menu in the following order.
1. Select "PATS functions".
2. Select "Card Key Code Erase".
6. Security access begins and the M-MDS displays the "OUT-CODE".
7. Input the "IN-CODE" that corresponds to the "OUT-CODE" displayed in the M-MDS screen.
STEERING LOCK UNIT ID CODE REGISTRATION[ADVANCED KEYLESS
SYSTEM]
NOTE:
When "OUT-CODE" is first displayed, turning the ignition switch from
the LOCK to the ON position 5 times will change the "OUT-CODE".
CAUTION:
Do not place the following devices in the vehicle while programming,
otherwise programming cannot be performed.
M-MDS
Personal computer
Device that can send/receive radio waves
NOTE:
The steering lock unit and steering lock component are a single unit.
Therefore, replace the steering lock component when replacing steering
2007 Mazda MX-5 Miata Sport
2007 ACCESSORIES & BODY, CAB Security and Locks (Advanced Keyless System) - MX-5 Miata
Microsoft
Thursday, July 09, 2009 3:36:54 PM
Page 44
© 2005 Mitchell Repair Information Company, LLC.